set a caption on the select printer dialog so that the user would know for which document they are being prompted
Symptoms:From: Jerry Kurtz [mailto:JKurtz@algorithminc.com] Sent: Wednesday, July 23, 2014 9:51 AM To: support Subject: Feature request: Caption on Printer select dialog When we have a workflow that is printing several documents in a row and the user is prompted to select a printer, it would be nice if we could set a caption on the select printer dialog so that the user would know for which document they are being prompted. I think this would only apply to the documents outside of the Documents system (i.e., Crystal reports embedded within the project).
Need access to Package Type and Size Maintenance screens for non-Administrators in Agility
Symptoms: The new maintenance screens being developed for Package Type and Size to deal with the 2015 demands of FedEx/UPS, need to be accessible to all users in Agility, not just Administrators
SF and POP Report Production Freeze Qty being updated based on Transaction Date
Symptoms: When reporting production in SF/POP, inventory frozen quantities are being adjusted based on the transaction date versus the document date of the reported production. Back dated SF/POP production reporting will not modify the inventory frozen qty if the current date is greater than the inventory freeze date.
Agility Mobile validate receipt date does not occur in a closed period
Symptoms: PO Receiving processes with the current date. If the current date is in a closed GL period, the transaction is not validated and stopped. Steps to duplicate: In GL close current period Open PO Receiving and receive in item. Error message should be received that period is closed and transactions are not allowed. But the transaction is processed.
getting negative hours when I use labor reporting in build 561
Symptoms: This dev task was said to not be able to be duplicated in 562. However it can be. The exact parameters listed in 62.752 have shown to produce a negative labor hours value in the labor hour fields when a order is reported against twice. We have determined that is has nothing to do with shift. It has been reproduced with operation 40 and 20 of order number 29 in the demobikes database. unfortunately this instructions below did not constantly produce the same result. However one instance of this setup product a negative 23.70 labor hours. This was repeated by Don on a 561 machine. Duplicated the issue with Macola Screens being set as in the in the Documentation Set lunch to 11:00-11:30 Start operation at 10:30 Report qty on one operation at a 10:45 this will make the total labor hours something other than zero. Open operation at 10:50, report qty at 11:15. The Labor Hours will be a negative amount.
Incoming inspection items entered in handheld do not show in RI/MBR aging report-Progression only
Symptoms: Po Receiving using Agility Explorer or Agility Mobile/gun for Receiving Inspection is not reporting items received Progression only - Items setup for Receiving Inspection location and received in WiSys Agiltiy Explorer or PocketES/gun is not displaying on the Macola RI/MRB report. If Receiving is done in Macola, it correctly displays on Macola RI/MRB report.
Can only set scale settnigs for client in Agility if user has Admin rights
Symptoms: If a user tries to go to Agility - Options - Pick Pack - Scale Selection, they can only get to this if they are an Agility Administrator. Logging in as Administrator does not work either as the settings are stored in an XML file under the user's roaming profile. A change is requested to move the Scale Selection out of Agility - Options - Pick Pack and put is below Desktop Printers on the Agility File Menu and call it Desktop Scales
The Transfer Object in Form Studio does not return the transaction id
Symptoms: When calling the Transfer object in form studio, there is an option to return the InvtrxRecordID that is created when the transfer record is written to the iminvtrx_sql table. This value does not appear to be getting set correctly as it is always returning a 0 (zero).
Several issues discovered on a new grid:
Symptoms: When using a alert on a process grid and using multiple alerts, if the display field is changed from the default alert field, only the first alert will work to duplicate create a grid using the query "select item_no,line_no from poordlin_sql" set three alerts the first set line_no=1 turn the field red the second set line_no=2 turn the field yello the third set line_no=3 turn the field green leave the display field to be line_no for all three alerts. run the grid and notice all Alerts work. Now change the display field to be Item_no on all alerts. run the grid and notice how only the first alert works.
packing multiple line items for same order number
Symptoms: When using Pick Pack 4 to pack an order with the same item on it more than once, The program allows you to pack the first item, but then says the order is fully shipped when you try to add the second line. The line number always comes to Pick Pack as the first line number on the order. When they are able to add all items and select the order for billing, only one line is updated with a ship amount greater than ordered. The second line stays as a status 1 macola order.
Im In-Transit Create Header does not return the transit number created
Symptoms: The Im In-Transit Create Header does not return the transit number just created. The IM In-Transit Create Line requires the transit number as a parameter. This issue particularly relates to using the object in a grid in Agility and not to the use of the object using code.
AM POP Report FG throws an error when doing multiple reports for a serialized parent
Symptoms: Consecutive serialized items reported on separate orders will accumulate the detail quantity and throw an error saying The header qty does not match the detail qty. To Duplicate create two POP orders for FRAMEASSY in demobikes. Both for a qty of one(to save effort) Using PocketESSever.exe report the first order. It will prompt for serial number for this item using the serial/Lot builder. When the serial lot builder/Collection has the proper number of serial numbers click save. Notice that this first order reported correctly. without logging out of PocketESServer.exe, enter the next order number. It will also prompt for serial numbers. when save is clicked, a messagebox that says "iPopTrx:ReportProduction:CheckRules :FRAMEASSY - The sum of the detail Serial/Lot quantities Does not Match Header Trx Qty:Header=1 :Detail=2 " No two consecutive orders can be reported from PocketESServer.exe These order can be closed without error using Form Studio.
When trying to change a default location on a gun the customer is presented with a "Object not set to an instance of an object" error
Symptoms: When trying to change a default location on a gun the customer is presented with a "Object not set to an instance of an object" error To Duplicate Update to 563 Using the handheld goto to Options and try to set the default location.
Pallet Labels not printing Ship To Information from Agility Mobile
Symptoms: When creating shipments on the handheld, the ItemAddToPackage object does not update the Ship To information on the wsPkgShipment record. It does not do this because the ReCalculateFirstOrder method parameter is not set to True on the object call. It cannot be set because it is not exposed in Form Studio. Please expose this property inside Form Studio so it can be set.
There is no total carton weight on any ASN for small packages.
Symptoms: When shipping small package shipments (FedEx/UPS/USPS) using Agility Pick Pack, if the customer requires an ASN, the Total Weight for the cartons is not being totaled on the ASN. Steps to Duplicate: 1. Add a sales order for an EDI customer that requires an ASN and code ship via to UPS 2. Print the pick ticket 3. Create a new shipment and add two cartons 4. Ship the shipment and be sure to enter the carton weights 5. Observe the ASN record in the EDI database has a zero for the ship_weight field.
mapping customers to specific labels
Symptoms: When using the AR Customer Master List search function in Agility, in a Progression environment, and using the contains filter, Our search pads the searching data with zero's. This is not a true contains, and does not lookup as intended If you search for a customer containing the number 1, no results are produced with Progression. The same search in ES works as intended. The following is the profile looking for a customer number containing '1' in a progression Environment. _executesql N'SELECT TOP 101 * FROM arcusfil_wv where (cus_no Like @cus_no) ORDER BY arcusfil_wv.cus_no ',N'@cus_no nvarchar(14)',@cus_no=N'%000000000001%'
Unable to remove all device security options from a user
Symptoms: When removing every single handheld form from Device Options in Agility User Security for a user, no options are actually removed. If you remove all but one, it works fine. Steps to Duplicate: 1. Go into Agility - File - Options - Users - select the Device Options tab and assign rights to a few handheld forms for the user 2. Log into Agility Mobile as that user and verify the forms are visible 3. Go back into Agility - File - Options - Users - select the Device Options tab and remove rights to a couple of handheld forms but leaving a few with rights 4. Log into Agility Mobile as that user and verify the forms that were removed are gone (they should be) 5. Go back into Agility - File - Options - Users - select the Device Options tab and remove rights to ALL remaining handheld forms leaving no forms with rights at all 6. Log into Agility Mobile as that user and the forms that should be gone are not. In other words, it is impossible to remove all rights to forms from a user. As long as there is one active right, others can be successfully taken away.
Shopfloor Enhancements for Moloney
[awilson 01/13/2015 12:23 (GMT -05:00)]Addeed for historical reference From: John Nicol Sent: September 26, 2014 11:13 AM To: Bruce Hollinger; Alice Sonnenschein; Ann Hayner Subject: enhancement for Maloney This is a description of what I am doing to satisfy the bin issue at Maloney. Code will be available for testing Monday. • A new option has been added to ShopFloor Reporting. o This option allow definition of a Bin Priority integer value. This value must be greater than 0 and will represent the priority of the bin that will be used for all backflush transactions. • Change was made to the Shopfloor desktop application o This application will now read the new setting flag described above and pass either the Command Line bin number or the Bin Priority as defined under Shopfloor Reporting Options. • Change made to the ShopFloor transaction object to utilize the possible passed in Bin Priority. o If a Bin Priority is passed in, the code will execute this query when a staging bin number is need. Previous code would have used the Command Line bin number. o Select top 1 bin_no from iminvbin_sql where item_no = @item_no and loc = @loc and bin_priority = @bin_priority order by bin_priority , bin_no o Notice that if there are multiple bin records that match the bin_priority the bin with the lowest Bin_No will be selected. o Also note that this logic uses the iminvbin.Bin_Priority column not the iminvbin.Issue_Priority column. o Once the bin number has been determined standard backflushing logic will be followed. This logic is the same as followed if the bin number had been passed in the Command Line. o If no bin number is found using the above query the transaction will fail and be rolled back.
shiprush changed the label name for their PDF label re-prints. Our code does not resolve the new name
Symptoms: ShipRush changed the naming convention used to create a pdf reprint. The naming convention used to be ShipRush UPS label for + tracking number.pdf They have changed it to ShipRush-v10+ UPS label for + tracking number.pdf Our code does not recognize the new naming convention.